APT KERASEAL ADO20

KERASEAL ADO20

Solvent Based epoxy floor coating

📝 Description

KERASEAL ADO20 is a two-component, solvent-based epoxy resin floor system. It offers good general chemical resistance.

📍 Key Uses

• Food and beverage manufacture
• Pharmaceutical production
• Precision engineering manufacture
• Hospital and hygienic areas
• Basements and trade centers
• Electronics manufacturing and assembly

✨ Advantages

• Good wear and abrasion resistance
• Excellent bacteria resistance
• Good resistance to general chemicals
• Gloss finish
• Hygienic and easily cleaned
• Economical and easily applied
• Available in attractive colors

📊 Technical Properties

Property	Value
Solid content	80%
Working time	45-60 mins
Minimum thickness	50μm
Min. Recoat time	12 hours
Max. Recoat time	72 hours
Surface drying time	6 hours
Bond strength	≥ 2.0 Mpa
Abrasion strength	≤ 65 mg
Impact Strength	≥ 50 kG.cm
Service temperature	-20°C - 60°C
Discontinuous (7 days)	60°C
Discontinuous (12 hours)	80°C

📏 Coverage

• For 75μm thickness: 0.10 kg/m²

Applying the Product

1. Surface Preparation

• Concrete must be solid with a compressive strength of 25N/mm² and a minimum tensile strength of 1.5N/mm².
• The surface must be clean. Contaminants should be removed by chemical and mechanical preparation (like shot blasting).
• Uneven or damaged areas should be repaired first with a suitable material.
• The moisture content in the substrate must be less than 6%.

2. Application Conditions

• Substrate moisture content must be < 6%.
• Substrate temperature must be between +15°C and +39°C.
• Maximum relative air humidity is 85%.
• Substrate temperature must be at least 3°C above the dew point.

3. Mixing

• Use a slow-speed mixer (no more than 600 rpm).
• First, mix Part A for 2-3 minutes.
• Add Part B to Part A and mix for another 2-3 minutes until the color is homogenous.
• Once mixed, the material cannot be resealed for later use.

4. Application

• Roller: Apply evenly with a short-hair roller to the desired coverage rate.
• Airless Spray: A 20:1 ratio piston pump with a 0